5 Uses For

Standard Colors for Your Underground Utilities

If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. The OSHA requires that utilities underground first be located before digging through a piece of land. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. The location of the areas where the lines were struck can experience service interruption. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. When the number is called, you can let the utility companies come out and mark their respective lines.

Marking lines may lessen the risks but there are time when accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

Temporary survey markings use pink lines. These are used by surveyors to mark off legal property boundaries.

Electric power lines, cable, conduit, and lighting cable use red lines. This color is appropriate for electrical works since it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Reclaimed water, irrigation, and slurry lines used purple lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

If you want to learn more about utility lines click here now! You can view here for more.